| Re: Guess it's time to replace the clutch slave cylinder... |
Subject: Re: Guess it's time to replace the clutch slave cylinder... by bogus on 2009/12/11 14:05:37 cool! Install is rather easy, but I would bench bleed the master first... if you can get a phoenix injector, get one, it will make bleeding a ton easier. Air is your enemy!!!! I used a brake bleed pump, draws the fluid in, just be sure you have a helper to keep the reservoir full! tighten it up and pump up the pedal to get pressure. Do a couple of clutch drops, meaning, push pedal to floor and let it fly up quickly. It will take a few miles for the system to fully set in. |
