Re: My 4L60 is out of the Vette. |
Subject: Re: My 4L60 is out of the Vette. by Steve40th on 2010/3/10 7:27:36 Quote:
I used the FSM, 1/8" drill bit, and a inch/#'s torque wrench. You release the throttle cable, disconnect the cruise cable, release the other cable and unlock the tv cable. You then put the bit in the ASR holes which lock all three cable reals together,. then you go clockwise and torque it to 71 inch #'s. Hold it, lock tv cable, remove torque wrench, then floor the throttle to reset the throttle linkage. I did it several times and the same result. |