Re: Rear Hub removal - came out in 2 pieces |
Subject: Re: Rear Hub removal - came out in 2 pieces by jmartynuska on 2010/3/18 23:22:39 Brian, It's a generic puller with 3 arms 120* apart (can be converted to a 2-arm), it hooked around the wheel flange with the center bolt bearing against the stub axle. I had heard of the rears coming apart before. Thank goodness for that nut on the axle, which makes periodic inspection by shaking the wheel a little difficult. That makes the tally 1 rear hub on the vette separated, 1 front hub on the f-body broken (the little stub of an axle snapped during an autocross run). |