| Power Steering Cooler Question |
Subject: Power Steering Cooler Question by sidney004 on 2008/1/9 17:10:07 Just wanted to confirm that on a 94LT1, that the inlet hose is low pressure and can be attached with a conventional hose clamp. I am replacing my leaking cooler with a used one, which came attached with the fancy factory inlet hose(double crimped on the cooler side with a flare nut o-ringed threaded connection on the opposite end.) When I disassembled my cooler, I kept the threaded connection intact(it never leaked and I don't want to fool with it! if possible) Is it O.K. to use a standard hose clamp or is there a reason for the double crimped factory attachment to the cooler? |
