| Re: Heads going back on |
Subject: Re: Heads going back on by Weavsvet on 2010/6/7 5:42:07 Quote:
Thanks Grizz! Quality wise, excellent. Fitment wise, they have problems. passengers side needed a hole for the vent tube on my '96. No problem there just popped a 7/8 hole in and put the grommet in. Drivers side is not so good. Had to grind a little here and there to get it to fit because of the wiper motor and the AC/alternator bracket. This was mentioned to me but of course being me I continued on anyway. Once on, the alternator won't go down far enough for the top bracket hole to line up. It hits the cover on the bottom. I did use a cork reinforced gasket and they are a good 3/8" or better thick. So that is probably part of it. Having said all of this I'll come up with something to make them work. I like the look of them and can't see going back to the OE covers. |
