Re: Fans and temps. |
Subject: Re: Fans and temps. by Fluff on 2010/6/8 9:44:49 Thanks again for your advice Bill. I tested this morning by first cleaning all relay connections. Then disconnecting the primary relay and running the motor up to 113c and the secondary fan kicked in just fine. Reconnected the primary relay and that kicked in too (109c). Checked that both fans cut off with +/-5c drop respectfully, so all looks ok. Perhaps I had a dodgy contact. I think you might also be spot on about the analogue oil temp gauge. Checking the numeric readout showed 110c whilst the water was at 113c so that would probably be closer to the readings you get on your 92. Okay mines a bit higher at 230f, but I was running the engine hot at the time to test the coolant... will test under normal driving next time I'm out, but would you think this 'seems' ok? That analogue reading is gonna annoy me now, with it hovering around the low end of the scale... I suppose that is a dash cluster job? |