| Re: What is this? |
Subject: Re: What is this? by Steve40th on 2010/7/16 22:15:13 A regular LT1 intake will port match fine to the Comp Port 195 Elim's as well. The port opening is not very big at all. I used a Fel Pro 1284 to port match the last intake I did. The gasket port is almost perfect size wise - but you will have to raise the locating dowl holes (simply drill new ones) up .080 to put it in the right place for the AFR heads (as the AFR intake port is slightly raised more comparable to the LT4 V/S the LT1 heads). An LT4 intake requires even less port work. Simply squaring up and widning the stock intake port results in an almost perfect port match. Here again I just used a Fel Pro 1284 gasket with the locating dowl holes re-drilled to raise the gasket up .080. http://forums.corvetteforum.com/c4-te ... e-ported-to-afr-195s.html And this is a good thread too http://forums.corvetteforum.com/c4-te ... l-things-to-remember.html |
