RE:Frame and suspension CAD files |
Subject: RE:Frame and suspension CAD files by Hilmar on 2008/1/20 10:59:27 697 mm. I just realized that the dimension for the spacing of the upper a-arms is not entirely correct. The distance between the frame mounts is 700mm. This is what it should look like: Of course each car's alignment differs so the 13 and 18 will most likely be different. (And I expect it will be different on mine after it gets aligned after lowering) I'll try to get a better measurment of the shock mount, it will be important for spring rate calculations with coil overs. |