Re: Reinstalled distributer and engine won't start |
Subject: Re: Reinstalled distributer and engine won't start by Matatk on 2010/12/29 3:09:49 Make sure you are actually at TDC on cylinder #1 and your harmonic balancer has not slipped! Double check the plug wires. Make sure when you are dropping the dizzy that it doesn't skip a tooth. Disconnect the EST wire when attempting to set the timing. Good luck, Matthew PS - this is not a rip, but from personal experience the first time I ever did this....did you verify the rotor itself is pointing at #1 and not just the #1 plug on the cap? Ie, the cap should be disconnected from the lower dizzy when reinstalling. |