Re: Collector Edition LT4 Build Up |
Subject: Re: Collector Edition LT4 Build Up by PLRX on 2011/1/13 20:33:48 SCAT 9000 Series Cast Steel Crankshaft SCAT Sportsman I-Beam Rods SRP Forged Piston Set Inverted Dome JE Piston Rings Engine was externally balanced by Dougans Racing Engines in Riverside, CA Balanced on a Hines Microcomputer Balancer Intake and Heads: LE2, by Elliot Portworks The heads flow 285 cfm at .600 lift on intake and 193 cfm at .600 lift on exhaust. -Valves: Duration: 223 intake 230 exhaust Lift: .565 intake .565 exhaust Lobe Separation Angle (LSA): 112 -Combustion Chamber: 52cc[/INDENT] MSD Opti and coil Magnecor Spark Plug Wires OEM flywheel, plate and clutch B&M Shifter Vortex Ram Air 1000 CFM MAF 58mm TB Hooker Shorty Headers Magnaflow Catalysts Magnaflow Performance Exhaust C5 Front Brakes with drilled/slotted front and rear discs Sway Bars: 32mm Front-26mm Rear Tuned by PCM for Less Compression: 11.1 No, I have not dynoed yet. But before the build up it made 306 RWHP in a Mainline Dyno. |