Re: Air conditioner pulley squeal |
Subject: Re: Air conditioner pulley squeal by BillH on 2011/8/28 23:50:40 Quote:
Depends, if you're sure it's not the belt (good tension), the clutch may be worn. If you're lucky, it may be as simple as removing a shim in the clutch assembly (it's hard to tell without hearing it). I'm not sure what the spec on an 85 is but a 92 has a gap spec of 0.020. Measured with a feeler gauge between the clutch plate and the steel housing on the pulley. But it may also be bearings. Good Luck |