Re: The 383 "freshening" has begun |
Subject: Re: The 383 "freshening" has begun by rklessdriver on 2012/1/22 17:55:32 As long as the piston is not cracked it's fine. Valves bending don't usually hurt pistons beyond a little eyebrow in the valve relief. Springs and such depend on the cam. 350 RWHP it would be easy to detune it down to that with whatever cam you run. Worse come to worse just make up a restrictor plate to go behind the TB..... I personally think the stock LT1 cam with 1.6 or 1.7 rockers on a 383 would be pretty close. Will |