| Heated o2 wiring |
Subject: Heated o2 wiring by tjpreul on 2012/8/30 2:14:17 I put heated o2's in my '92. Now when I stop for gas it doesn't fire right up. It will fire then die. To get it to start I have had to feather the gas (not much). I have also tried push the pedal to the floor before turning the key. I am wondering if I need to put a delay on the heater circuit. A separate relay was installed to run power to the o2's. It has only done this when there is already heat in the engine, not on the first start. When I turn the key I wait for the fuel pump to prime before I crank the engine. |
