Re: Vibration.... IS GONE!!!! |
Subject: Re: Vibration.... IS GONE!!!! by LD85 on 2012/8/30 23:32:59 I finally got around to pulling the half shafts tonight One of the u-joints had a chatter/flat spot on the pinion end, so I am assuming that this was the culprit. Probably in a bind as Bogus described,,,, and,,It was on the passenger side which I was suspicious of all along, so I'm feeling very confident that the problem will be resolved. I will install all new forged U-joints and clean everything as Bogus suggests and put it all back together. Last weekend I installed the FAST 2.0 Crank Trigger so once its back together next weekend, (going to the NHRA Nationals and shooting range this weekend) it will be ready for a tune, less the cats, A Special, Big Thanks to Bogus for figuring this out for me :-) |