| Re: Header bolts |
Subject: Re: Header bolts by Travis93 on 2008/3/4 4:26:50 After measuring it looks like there is almost an inch of thread just in the heads then I have ΒΌ inch thick flange in the headers to 1 inch here I come. I liked the idea of these as much for the Allen head with external flats as much as for the wire, sounds like the wire is a waist of time though. I will probably just go with stainless socket head Allen bolts but would still like the flats on the outside for a backup system. By the way Notorious thanks for the gasket advice I was about to ask about them. |
