Re: 84 auto corvette wont start. |
Subject: Re: 84 auto corvette wont start. by scooter18155 on 2008/4/29 3:00:43 OK heres an update. I just got back from taking a quick look and heres what i found out. I confirmed the ignition wire is hooked up properly to the starter. However i got to that 10 amp fuse behind the dic and it still wont start so that should rule out the security module being the problem right? Also while i was under the car confirming the wiring i got one of those power testers that you can connect to a wire and then to a ground and if you got power the light will light up. I connected this to my ignition wire while a buddy tried cranking it over and no light is lighting up so I'm not getting juice there. also took a min to disconnect both horns and put a fuse in and tried to push the horn and the fuse didn't blow so it appears one of the horns is bad. now i am going to get under the steering column and see if i can test the wires coming in and out of the ignition switch to see if I'm getting anything there. Ill probably get a new one to have on hand while I'm there to change it out. only thing I'm concerned about is if theres a line fuse somewheres in the ignition wire thats blown. Does anyone know if there is one? |