Re: Radiator Install...(warning, this is long....dial up hahaha) |
Subject: Re: Radiator Install...(warning, this is long....dial up hahaha) by jhammons01 on 2008/6/2 21:28:35 I did this job two weekends ago. I too had problems with the lower trans line. I wound up having to use Vice Grips to the a good bite on that soft ass metal. My '84 must be an early one as it did not have a coolant level sensor....So not knowing what that hole was, I had to spend an evening questioning every one....then I got NAPA to source one for me after going to 5 different auto parts stores. That was my big SNAFU for that job I cut the radiator shroud so that it can be removed later without taking off any hoses or lines. This way it can be cleaned easily |