Re: Major work necessary - rebuild or replace? |
Subject: Re: Major work necessary - rebuild or replace? by Schrade on 2008/8/30 4:50:28 This is how far I've gotten on dash disassembly. NOTICE THERE ARE NO EMPTY SCREW HOLES. PUT EVERY SINGLE SCREW BACK IN THE HOLE WHEN EACH PIECE IS REMOVED. I put my computer vacuum attachments on the shop-vac and went through all the orifices, then I put in the controls this morning so I could go to see the mechanic that the Chevy dealership referred me to... He suggested replacing the O2 even tho' it is an intermittent, and demonstrates intermittence while logging on Tech I, and Genisys scanner.And, even tho' it started out at the same time my other 2 electrical problems started (2 months ago) as an 'OPEN O2 circuit', not 'LEAN O2', as it is now. Of course, the H41 ICC fault, and the H72 VSS loss were nowhere to be found when I was there................. |