Re: Rubber Brake Hoses for 86 Vette-Help! |
Subject: Re: Rubber Brake Hoses for 86 Vette-Help! by Flashman on 2008/8/30 23:47:06 Hey Guys, Yes, the threads are the same but my brake hoses have a deep threaded socket. But, I figured out the problem. I purchased two sets of GM brake hoses and they did not fit. It turns out that when C4's were built in the 80's GM used two types of brake systems, AC Delco and Bendix. My 86 has the Bendix brake system. I went to advance auto and looked at their computer monitor with pictures of both brake lines. I could not see inside of the treaded socket but I looked real hard at the crimped ends and mine is shorter than the AC Delco. I took a chance and ordered the bendix. They came in yesterday and Bingo, those were the correct Brake hoses. I asked many Corvette guys and no one knew, not even the auto parts stores knew. I talked to an old timer who was a Corvette mechanic for GM for 25 years. He tells me this today at a Corvette event. I appreciate all the help guys. Sometimes I feel like a Corvette detective that has to solve many mysteries. Brake lines are in, New master cylinder, bled brakes and Frankie is ready to roll again. Take care. Joe - Flash man |