Re: Cooling issue and lean condition concerns |
Subject: Re: Cooling issue and lean condition concerns by BrianCunningham on 2008/9/17 2:48:30 If the TPS sensor is not mounted right, it would give the computer a wrong reading, so the engine my think its getting more air than it is. BTW I started a thread "other there" http://forums.corvetteforum.com/showthread.php?t=2134515 Check this out: [QUOTE]Vector Vette: Brian, We could get the L98 motors to run below 200 on water but never could get the LT1 to do that. 240 is too high though. I ran my C4 with a Meziere electric water pump, Griffin radiator, heat extractor hood, take the guts out of the thermostat, block off the bypass for the quick warmup, water with just a little anti-freeze for corrosion protection. I had my rev-limiter set at 7200. With this setup the car would run between 210 and 220 water.[/QUOTE] |