Re: Half Shaft replacement U-joints |
Subject: Re: Half Shaft replacement U-joints by jhammons01 on 2009/2/7 1:40:39 ^^OK, so I took out the Tie Rod bolt and the Spring bolt per the posted article by Scorp. This gave the hub enough wiggle for the thing to pry lose and drop out the bottom at an angle. The Camber rod is still in place. My deal is, the lose caps fell out with the pins going everywhere.....when I'm going back in, how am I going to get all four caps to stay put!!!???!!! Stay tuned. I'll post the woes as I go. |