Re: pulled a TPS code,How do I fix it? |
Subject: Re: pulled a TPS code,How do I fix it? by CentralCoaster on 2009/2/9 3:33:40 Turn the car on and check the voltage between the top 2 pins. It should be about .55-.65V. You can stab the wires with your voltmeter prongs, or stick some paper clips into the connector to contact the wire. If it isn't .55-.65, loosen the two torx screws and rotate it until it is. (I'm 90% sure it's the top two wires, but if that reads 4 or 5 volts, it's the bottom two.) |