| Re: L98 upgrade |
Subject: Re: L98 upgrade by PeteK on 2009/3/12 11:57:34 In my opinion, no. They can work, but both are huge. If it were my car, I would look for the following: Int duration @ .050 224 Exhaust duration @ .050 230 Intake lift .550 with the 1.6 rockers Exhaust lift .550 with the 1.6 rockers Lobe seperation 112 I would not go flat tappet cam, and would do a roller conversion. In my opinion, flat tappet cams should be obsolete. Without zinc in the oils, the risk of break in failure is not worth it. |
