Re: front sway bar interference with QA1 coilovers |
Subject: Re: front sway bar interference with QA1 coilovers by klkordzi on 2009/3/14 2:52:48 Its been over a year since I bought the parts and think I got them from Jegs. Anyway I used a male rod end and what looks like a female rod end with a longer shaft. From what I remember you could get them in different lengths. I then fab'd up a mount from a piece of 1/4 inch angle steel that used the same mounting holes on the a arm but because of the "L" of the angle it moved the mounting point for the end link forward. I'll get a couple pics tomorrow and post them. I'll also see if I have the shipping lists to try to get the part numbers |