| Re: Help identifying a source for this hose. |
Subject: Re: Help identifying a source for this hose. by BillH on 2009/7/27 18:41:49 I had the same thing, couldn't find a replacement anywhere. Plus the IIRC the connection to the TB is larger than the switch. I ended up getting 1/2 in vacuum hose and heating one end with a heat gun, a little WD40 on the TB nipple and some cussing to get it on. The vacuum hose did not kink when I bent the 90. It's been on for 2 years now and is still OK. |
