Re: 700R4 - 4L60 Build Up Inside |
Subject: Re: 700R4 - 4L60 Build Up Inside by PeteK on 2009/8/23 21:02:22 Today's goal is to tear it down to sub-assemblies, and to clean and prepare the empty case. Painting it also. The guy who built it last was a freakin butcher. He was too cheap, stupid or lazy to put the orifice screens back in it, so all the trash went through it, and scarred up alot of stuff, including some machined surfaces in the case. The bad news is it will require alot to fix. The good news is that it is all fixable, and will permit me to show some repair techniques not normally needed in a typical overhaul. What cannot be fixed will be replaced with new or quality used parts. Stay tuned, pics to follow. |