Re: Dana 36 Axle Snap Rings |
Subject: Re: Dana 36 Axle Snap Rings by RestoMod57 on 2009/12/22 16:01:54 Thanks Joe. The thickness I need is .050" or 1.27mm. The color is plain (uncolored). If you also have the blue, I'll buy those as well. Blues are .055" or 1.40mm. I probably set up the backlash a little tight. Spec is .006-.009" and I'm right at .005". Probably why the old rings don't seat completely. So, I may have to tear is down again. Pinion depth and preload are both good, although I could use a little more preload. This is no time to cut corners, so I will tear it down and make adjustments. Thanks again. I'm new to these type forums, so how do we proceed? |