| Re: Rear Wheel Bearing Replacement? |
Subject: Re: Rear Wheel Bearing Replacement? by bogus on 2010/1/16 22:36:30 yea, but that is part of the "take the knuckle off" step. Also, there has been an update. The big bolt is recommended to be torqued at 200 ft/lb. You will need to get 2 T55 torx sockets... I recommend 2 because the bolts that retain the bearing are a bitch and might break the sockets. With torx sockets you MUST be square on them. I did mine on the car. It wasn't bad, but I can see the advantage of doing it on a bench. I would also recommend a few other fixes: 1. rear ujoints 2. rear spring bolts. depending on mileage, these could be in really bad shape. 3. shocks |
