Re: No Clutch Pedal |
Subject: Re: No Clutch Pedal by jmartynuska on 2010/2/14 5:05:52 OK.... The fork is only about an inch inside the bell housing and I could feel the slave compress quite a bit. I went back and did as suggested in post #3. Since I can't get parts until at least Tuesday, I thought what have I got to loose at this point. Time is about all I have. Pulled the whole system out, did a bench bleed on the master, hooked the system together and bled. Reinstalled everything. And, since all I have it time.... ...I took that rubber cup out of the master cylinder, filled it all the way up with fluid and walked away. This evening I could feel a little resistance in the pedal about an inch off the floor. At that point I kept pumping and pumping and pumping the pedal. D@mn thing works now. There must have been some air in there I just wasn't getting out. I thought it really strange that I didn't get any pedal at all after bleeding. What ever I did bleed wise the first time around seemingly had no effect. That's never happened to me before. Usually I get some sort of pedal, even if it is a little spongy. Live and learn, I guess. Pretty sure going back to post 3 above got me there. Thanks! |