| Re: NEED TIPS FOR BLEEDING ZF HYDRAULICS. |
Subject: Re: NEED TIPS FOR BLEEDING ZF HYDRAULICS. by tpi421vett on 2010/6/25 6:47:51 [quote] Josh wrote: If necessary, you can unbolt the slave and hold it in such a manner as to make the steel inlet tube the highest point. That way, as you pump fluid in the bleeder valve, all the air goes up and out the line. quote] I agree, you have to turn the thing upside down to get all the air out of it. Why didn't GM put the bleeder on the top? |
