Re: Has anyone done a clutch on a ZF6 and why I think Centerforce SUCKS? |
Subject: Re: Has anyone done a clutch on a ZF6 and why I think Centerforce SUCKS? by BrianCunningham on 2010/7/6 21:17:50 It pops off the fork But you need to be REAL CAREFUL about it. The fork is easy to bend. If your removing the bellhousing all together It best to leave it attached the the ball and screw the ball in towards the engine till it disconnects from the bellhousing. You can then remove the bellhousing then the fork. to put it back together, screw the ball back onto the housing, put the fork on the in retracted position, and slide it back over once the bellhousing is installed. worked 3 times so far. BTW if you take it apart, check the rear main seal, great time to replace it. |