Re: TPIS vs Stainless Works LT's |
Subject: Re: TPIS vs Stainless Works LT's by Weavsvet on 2010/7/14 23:55:31 Looks like I'll be sending some 1.7 Scorpions back. I got this from J. Patrick at AFR just now. Mike, I wouldn't bother with the 1.7 ratio, the increase wear on the valvetrain from the accelerating the cam with the higher ratio is not worth the minimal gain you will see. Thank you for choosing AFR, Jerami Patrick AFR Sales & Technical Support www.airflowresearch.com (661) 257-8124 ext. 111 -----Original Message----- From: mike weaver Sent: Monday, July 12, 2010 3:23 PM To: sale Subject: 1.7 rockers... Hi, I have a set of your 195 street eliminators on my '96 vette that I purchased about two months ago from you. My cam may be lacking enough lift and I was wondering if I can run Scorpion 1.7 rockers without causing any issues. I have CC 1.6 on there now. My cam has .565/.565 lift and the 1.7 should put it very close to .600. Sincerely, Mike Weaver |