Subject: Re: LTFT #'s high... by Weavsvet on 2010/7/22 0:12:21
Quote:
Steve40th wrote: Just for shits and giggles, put your factory throttle body back on and see what happens. Its a known fact , cams, strokers and aftermarket throttle bodies can cause split BLMS/FT issues.
No luck on the tb switch Steve, nothing changed. However, I did get Bank1 squared away. There was a leak in the plug on the AIR fitting. I put a M22X1.5 oil plug in there and all is well on that side. I had made one for the other side out of an old AIR fitting so I thought it may be leaking also. I switched sides with the two plugs but no change. I switched out 02's on the Bank2 side three times just to see if anything changed at all, nothing. So, I guess I'm down to the exhaust gasket. I used the Felpro gaskets. I ordered some Percy's today from Jegs. Their shipping to me is usually fast so I should have them Friday, hopefully.
Thanks for the suggestions. I'll report back when I get the gasket changed on Bank 2.
