Re: a/c saga continued... |
Subject: Re: a/c saga continued... by BillH on 2010/8/9 13:24:05 Quote:
Good that it's fixed. And good to know that the clutch will come off w/o pulling the lines. I have to pull mine, it squeals on off idle throttle blip but works fine above idle. I searched an a/c forum quite a while ago. You can check the gap on the clutch plates with a feeler gauge. IIRC, it's supposed to be around 0.020 - 0.022. Mine's wider than that. Should be able to reduce the gap by removing a shim, (supposedly). |