Re: Head gasket leaking |
Subject: Re: Head gasket leaking by Matatk on 2010/10/5 12:53:13 Here are some numbers from CentralCoaster - you can thank him for the info: TB = (4) M8x70 Throttle bracket = (3) M6x12 Distributor cover & TB plate = (9) M4x12 Intake base = (12) 3/8-16x1" L98 Tstat = (2) 3/8-16x1.25" EGR = (2) 5/16-18x1" Perimeter VC's = (8) 1/4-20x1" centerbolt VC's = (8) 1/4-20x3.5" Top of runners into plenum: (7) M8x30 plus the special bolt with throttle cable holder. Bottom of runners into intake baseplate: (4) M8x55 underneath each runner pair between tubes. (6) M8x30 at each end of the runner flange, and one in the middle (2) M8x40 go into the backside of the runner flange, you have to do these from the opposite side of the motor. Fuel rail: (4) M8x35 bolts from the top (2) M8x20 on the little flange in front of the intake. |