Re: 92 corvette front brakes seize |
Subject: Re: 92 corvette front brakes seize by 93Moneypit on 2010/10/20 21:40:47 I agree with the brake lines that's probably the most common one and the caliper piston seizing is another ill bet it your master cylinder or rod length Ive used a small dab of grease on the end of the rod. Bolt the master up take it off and see if the grease is the same as it was when you put it on there adjust the rod dab of grease bolt it up keep repeating this until you see the lest amount of change in the grease. That's the way to get it closest to perfect. |