Re: If it ain't one thing... |
Subject: Re: If it ain't one thing... by BillH on 2010/12/16 14:38:09 Well, there's hundreds of published papers on this, I've read a bunch done by the PHDs at AMP Incorporated cause I had to. Some back & forth discussion here: http://continuouswave.com/ubb/Forum6/HTML/001202.html My only point I guess would be, if you pull the ECM connector on a LT1, you'll notice that there's no lube at all on the contacts. (Gold) You may see some lube or dielectric grease on housings where there are tin plated contacts. This is to inhibit fretting corrosion and to reduce water/air intrusion. |