Re: Head gaskets?! |
Subject: Re: Head gaskets?! by BillH on 2011/2/8 15:37:48 Quote:
Be real careful when loosening the knock sensors for the first time, they're easy to break. I'd suggest a socket and breaker bar to loosen them the first 1/4 turn, make sure you hold the socket up tight against the sensor so that it doesn't cock at an angle when you pull the breaker bar/ratchet. Don't remove the factory sealant in the threads. There's plenty there for reuse and more sealant may reduce the sensor's effectiveness. Mine have been off/on 3 times with no additional sealant. And these are pipe threads - torque is 14 ft.lbs. |