Become a Fan!
Login
Username:

Password:

Remember Me

Lost Password?

Register now!
Main Menu
Who's Online
314 user(s) are online (247 user(s) are browsing Forums)

more...
Guru Dictionary
Print in friendly format Send this term to a friend  Rear Hatch Release
There are releases on the trailing edges of each door and one under the center console.

The center console button will only work if the car is in...
Supporting Vendors
Platinum
Mid America Motorworks
Mid America Motorworks FREE CATALOG


Gold
FIC 770-888-1662


Registered Vendors
Guru Friends
Supporting Banners

TIRERACK.com - Revolutionizing Tire Buying


Shop for Winter Tires Now!




Support This Site
Report message:*
 

Did rear bearings and brakes, something weird on the right rear brake. Look

Subject: Did rear bearings and brakes, something weird on the right rear brake. Look
by Steve40th on 2011/2/20 0:05:48

My rear bearings were shot, as pics show as they were leaking grease. So, I put SKF rear bearings in. I also, did new teflon washer, greased brake guide pins, and greased the splines of the spindle to alleviate all noise. Wrong, after all was said and done, u joints need to be replaced.
Anyways, look at the right rear rotor. I painted the top hat, as it was silver and going to rust, with black caliper paint. Some bled over to the face of the rotor. But after bedding in the brakes, HPS Hawk pads, and 75 miles of driving, this is the wear pattern. Kinda missing about an inch of rotor it should be touching. Left side is fine, as all other rotors and pads. What do you think.
CorvetteForum.guru is independently owned and operated. This site is not associated with or financially supported by General Motors.

Copyright 2008-2015 CorvetteForum.guru

CorvetteForum.guru is a Guru Garage Site (Coming Soon!)

If you have any questions about our site, please contact us at Andy@corvetteforum.guru.

Powered by XOOPS 2.56 Copyright 2001-2014 www.xoops.org

Hosted by GoDaddy.com.