Re: Slave Cylinder on an '84 4x3 |
Subject: Re: Slave Cylinder on an '84 4x3 by jhammons01 on 2011/2/28 14:40:38 ^^The problem arises from the Block not mating to the housing on the new Slave. The old slave has a square area where the block with the banjo can mate..... The block with the banjo has a shoulder on it to keep it square on the old Slave...the new slave is not machined the same way at all.. I started to just put it together, but the shoulder on the block would prevent it from ever mating up. The next thing was to change the hose. That is where I stopped and backed off to ask questions |