It took longer than I expected but I'm happy to say the the C4 FX3 compatible pin top shock mounts that we distribute from Hardbar are now here.  You can get all the details on this fantastic pin top shock mount here.  Until now they were only available for C4s with 10 mm pin tops but now we have a kit that is fully compatible with the ride adjustable FX3 shock.

The FX3 kit was test fitted to a C4 that ran FX3 shocks with coilovers as well as the FX3 shocks we recently put on our own track car.  Below is a picture of one of the rear shocks off the coilover equipped car.  Notice that everything stacks together and is bolted with the OE nut that comes on the shock shaft.  Bolt the eyeball plate to the rear frame and this shock is ready to go.

Below is a pic of how the sensor cup of the FX3 controller fits into the Stainless Steel cap of the shock mount.  There are two Stainless Steel caps per shock and they have different size through holes to accommodate different parts of the shock shaft.  Some care must be taken during assembly but the included instructions will show you everything you need to know.

For more information on this product please visit our website where you can view some videos of how this shock mount works.

We're excited to have these in stock and they can be purchased at our online store that is now accepting credit cards.