| Re: LT4 Hot Cam?? |
Subject: Re: LT4 Hot Cam?? by tjpreul on 2011/3/11 5:17:06 Depending on the milage you might want to replace the lifters too. I would. If you are planning on new springs you will have to remove the heads. The intake is very simple to remove on the LT1. The Bosch III injectors will be fine for these mods. For the pan gasket the RTV is used because you don't want to crank the bolts down, and the corners never seal proper. You only use a small amount so it doesn't squish out everywhere. |
