| Re: Roller Rocker issue |
Subject: Re: Roller Rocker issue by JeffK on 2011/4/14 2:16:36 Ha-ha, I think there is an exhaust leak now too.. Anyway, all I got from doing the adjusting with it running is a severe brush burn from the belt. My fault for not remembering that it's there. I started doing it the way that Jake used to preach. Watch this rocker and when it starts to open adjust the intake..not 100% correct but I'm tired and pissed. I got the drivers side all lashed. I noticed that the #5 exhuast rocker did not have very much resistance. Even with it lashed I can take my thumb and push it down about 1/8" on the pushrod side. It will spring back up when I let go so there's no doubt that it is in the pocket of the lifter. So, I think I'm going to have to tear the whole intake off again to swap out lifters...@!#%&*^%$ Can I swap out the stock lifters for LS7's without changing the cam? Thanks, Jeff |
