Re: Break Away Torque D44 Posi |
Subject: Re: Break Away Torque D44 Posi by Aardwolf on 2011/4/21 17:38:55 I check that on mine once in awhile. I found it to hold 110 ft/lbs using the center 36 mm nut and torque wrench. Like you I also wondered about this, about what others found, and what the spec should be. I haven't found others to be checking the torque. I did talk to Brian about it, (bjankuski, not sure he is here) he works on differentials, he said at 110 it is good. He thought when it got down in the 40 range it would be bad. (jives with 40 min, I guess) |