Matatk wrote:
Quote:

Aardwolf wrote:

Yes stock is routed that way. When I redid the system on mine I followed the tips at B&M.

http://bmracing.com/bmracing/images/bm_cooler_techdoc.pdf

Mount the B&M SuperCooler with the fittings on
top or on the sides. It is not recommended to
mount the cooler with the fittings pointing down as
this may create an air pocket in the cooler resulting
in reduced cooling efficiency.

***
When mounting the cooler with the fittings on the right or left side, the lower fitting must be the inlet with the top fitting routing the fluid back to the transmission.
***

Awesome that makes sense. Thanks to you and Pete for the info on the sensor mounting.