| Re: Climate Control Damper is stuck in defrost mode |
Subject: Re: Climate Control Damper is stuck in defrost mode by Fredbird on 2011/6/28 22:14:00 I think I've found the issue... I was able to trace back the vacume hose all the way to the HVAC processor and there is good suction at that point. Also, when I disconnected the harness from the processor I heard the whoosh of air go in because it's holding suction. That's good. However, I think the issue is that all the nipples on the Processor have collapsed at the tip. **-See picture of my processor vac harness-** Which is keeping the doors from operating properly.(I read about someone else having this issue) I think I have 3 options: 1. clip the tip of each nipple and re-assemble the unit (see if that works.) 2. replace the harness with individual vac. hoses coming out the hole. and patch them to the proper doors. 3. replace the harness with a new one (May be hard to find. 4. Replace the entire processor. (from what I've found... Very expensive) |
