| Re: how can i make a tcc lockup switch? |
Subject: Re: how can i make a tcc lockup switch? by matts85vet on 2011/6/19 17:38:33 i checked the voltage between a and f with koeo--12v. when brake peddle was pressed--0v. so i guess the switch is ok. ill try the jumper wire -paperclip- and see if that does anything. if not, it must be the connector at the tcc solenoid or the solenoid itself-how hard is it to replace the solenoid? the trans was rebuilt 2 years ago-is the tcc solenoid normally checked and replaced? |
