Re: I just bought a KENT MOORE J-35890 ABS test box |
Subject: Re: I just bought a KENT MOORE J-35890 ABS test box by gwnewlon on 2012/7/11 17:08:19 Matthew, Thank you for your information. I have the ABS tester with it's Manual. The manual has picture of the J35892 connector harness. The tester arrived without the connector harness. So, I need a way to get the tester to talk to the modulator. According to the manual the tester cycles the modulator pump motor and will use the modulator to cycle each wheel solenoid to stop the rotating wheel. Should there be a J35892 cable housing available I would like to purchase it. If there is a drawing showing the wire routing or pin out I would like to purchase it. Any help would be appreciated. Best Regards, Gary Newlon |