| Re: 1986 No start enigma |
Subject: Re: 1986 No start enigma by Matatk on 2011/7/28 21:47:30 When you say it won't start, is the starter engaging and the motor won't catch? Or the starter won't spin? If the starter won't spin, you can bypass the starter enable relay in the dashboard by splicing the two wires together. From vatssucks: "Clip wire from Pin A ( DK GRN/WHT) and wire from Pin E (YEL) and wire them together. Leave some excess sticking out of the wiring harness in case you ever want to revert back to using the relay again."  If the motor will turn over, will it run with starting fluid? If so, it's a fuel delivery problem. Probably the ecm not providing fuel. Have you put a noid light on the injectors to verify they are firing? Also, are there any error codes that would indicated a bad ecm or chip? Matthew |
