Another problem, is their a way to check the oil pressure switch/sensor? |
Subject: Another problem, is their a way to check the oil pressure switch/sensor? by damien89 on 2011/8/7 15:22:09 Lately the instrument cluster always displayd 72-75psi oil pressure no matter what rpm. Now i know that this is impossible, after consulting the fsm it tells me to either use a fused jumper, connect it between tan and ground and the cluster should display 0 psi or to use a j33431 instr panel tester and see what results you get with variable ohms. Now as i do not have these two things to make the tests is their a way to check the sensor itself? The sensor is the 3 wire type on the 89 vette. Here's the funny thing, on the 89 fsm on page 8A-82-1 the diagram shows the sensor with just one wire coming out instead of three?? How come? |